background image

2

19011739 - Rev. A - November 30, 2018

EXPLANATION OF SAFETY AND NOTICE SYMBOLS

DANGER

 DANGER indicates a hazardous situation which, if not avoided, WILL result in death or serious injury.

WARNING

 WARNING indicates a hazardous situation which, if not avoided, COULD result in death or serious injury.

CAUTION

 CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE

 NOTICE is used to address practices not related to physical injury.

 READ AND SAVE THESE INSTRUCTIONS 

DANGER

Energized electrical circuits present a life-threatening 

hazard of electric shock, explosion, or arc flash.  

 -NEVER hose down unit or clean with water jet.
 -ALWAYS disconnect unit from power IMMEDIATELY 

if bare wires or other electrical conductors are 

exposed.

 -ALWAYS ensure all electrical circuits are 

disconnected and discharged, with an 

appropriately rated voltage detecting device, 

before performing service, maintenance, or 

installation work.

 -ALWAYS follow all national and local standards, 

laws, and codes, as well as all applicable safe 

electrical work practices.

Failure to follow these safety instructions WILL result 

in death or serious injury.

 

Refrigeration systems that use R-290 (Propane) 

present a life-threatening hazard of fire or 

explosion. All refrigeration systems present a 

hazard of flash freezing and oxygen displacement.

 -ONLY defrost unit naturally to avoid puncture or 

damage to the refrigeration circuit.

 -ALWAYS perform repairs on the unit in a well 

ventilated area, away from any source of ignition.

 -ALL service work MUST be performed ONLY by 

factory-authorized service personnel following all 

national, local, or other applicable refrigerant safe 

handling work practices, standards, laws, and codes.

 -ONLY use original equipment manufacturer (OEM) 

components designed for use in R-290 refrigeration 

systems when servicing, to minimize the risk of 

ignition from incorrect parts or improper service.

 -ALWAYS use caution when handling or moving 

refrigerated equipment to avoid damage to the 

refrigeration tubing so as to minimize the risk of leaks.

 -ALWAYS read the unit’s operation and service 

manuals completely before performing service work.

 -ALWAYS use caution when handling refrigeration 

discharge lines because they are hot and can burn.

 -ALWAYS wear appropriate personal protective 

equipment (PPE) when servicing equipment.

Failure to follow these safety instructions WILL result 

in death or serious injury.

WARNING

Unauthorized modifications or repairs pose a 

hazard in the form of an improperly functioning 

unit.

 -ONLY for commercial use.
 -NEVER make ANY modifications to the unit that are 

not authorized by documentation provided by Franke.

 -NEVER remove any labels from the unit.
 -ALWAYS replace ANY labels that have been 

removed or damaged IMMEDIATELY.

 -ONLY use original equipment manufacturer (OEM) 

parts when service, maintenance, or installation 

work is performed.

 -NEVER operate with factory installed parts or 

components removed.

 -NEVER use for other than intended use. 

Failure to follow these safety instructions COULD 

IMPORTANT SAFETY INFORMATION

Содержание 18014424

















Отзывы: