FRANCO srl Manual of use and maintenance AP
23
6 - PROBLEMS AND SOLUTIONS
Before undertaking any maintenance,
disconnect the device from the electricity and water supply!
PROBLEM
CAUSE
SOLUTION
The device does not start.
The power supply is
not plugged.
Verify the electrical connection, or the
functioning of the mains itself.
The power supply is
not plugged.
Verify the electrical connection, or the
functioning of the mains itself.
The exchanger or the
fan are dirty
Perform a complete cleaning of the
appliance.
No air-flow or the air-flow
is feeble.
The motor is broken.
Contact qualified and authorized
personnel to replace the motor.
The outlet air isn’t heated
or cooled
The thermal circuit is
not working.
Check the thermal circuit for losses.
Contact qualified and authorized
personnel to check the line.
The fan is dirty
Perform a complete cleaning of the
appliance.
The fan is noisy
The fan is broken
Contact qualified and authorized
personnel to replace the fan.
The fan is dirty
Perform a complete cleaning of the
appliance.
The fan is broken
Contact qualified and authorized
personnel to replace the fan.
The machine vibrates.
The machine is not
installed correctly
Check the fasteners of the appliance,
tight the loosen screw.
