2.6. Coals layout
Only the ceramic coals supplied with this appliance are
to be used. The coals should only be laid as shown on
the following pages. Replacement coals and ceramics
are available from your dealer, but should be installed
by a competent person (e.g. Corgi registered).
Please ensure that when fitting the matrix and coals,
that you do not obstruct the pilot.
FRANCO BELGE accept no responsibility for any injury
sustained whilst handling hot ceramics.
Instructions for the layout of the prefixed ceramic
matrix and loose coals for Belfort balanced flue.
Parts : 1 Ceramic mat, 9 Ceramic coals.
Figure 7
-
Place the ceramic matrix (rep. 1) above the ceramic
mat, on the supports, onto the top of the burner body.
Figure 8
Place 4 coals on top of the matrix (A) as shown in (B).
Place the remaining 5 coals as shown in (C).
1
2
3
4
1
1
Figure 7 - Fitting the ceramic matrix
1 - Ceramic mat (coals support)
2 - Burner
3 - Burner holes
4 - Pilot
A
B
C
Figure 8 - Coals layout
Balanced flue Gas stove
Model. 154 05 06 / 154 05 07
8
Technical manual
