Francis A7290, Инструкция пользователя и руководство по установке

Страница: 14 / 59

Fitting instructions for the 5Kw xenon lamp
Referring to the diagram overleaf:
1) Unfasten ten latches (A) on the front and rear of the searchlight.
2) Remove the front bezel (B) and rear bezel (C) assemblies.
3) Unscrew the two M6 hexagon screws (D) from the front lampholder mounting block (E)
and remove the front lampholder assembly from the mounting bracket.
4) Loosen the knurled screw on the front (F) and rear (G) lampholder assembles.
5) Attach the NEGATIVE (cathode) end of the lamp to the lamp holder socket (H) which
is supplied separately, using the M5 grub screw (J).
6) The lamp can now be inserted with the lamp holder socket into the lamp holder rear (I),
the negative (cathode) end of the lamp is towards the rear of the searchlight.
7) On the rear lamp holder, tighten the knurled screw (G) onto the lamp holder socket (H)
to hold the lamp in position.
8) Fasten the front lampholder mounting block back in position, it will be necessary to pull
the front socket against its spring to fit over the lamp. When in place tighten the front
knurled screw (F).
9) Fasten the front and rear lampholder leads as wiring diagram, ensuring the
connections are secure.
10) The front bezel and rear bezel can now be replaced.
11) Removal is the reverse of the above.
Back To Top