Mounting
19
7 Mounting
The motor may be mounted exclusively by specialised electricians.
WARNING!
Risk of injury for unauthorised persons!
Non-trained persons do not know the risks in the working
area and are considered as unauthorised persons.
– Keep unauthorised persons away fro the working
area, in case of doubt approach these persons and
instruct them to leave the working area.
– Interrupt the work activities as long as unauthorized
persons are present in the working area.
Danger!
Risk of injury due to electrical current!
Possible serious injuries due to electrical current.
– Before working on bare terminals or at the open
terminal box, make sure that the power supply is
switched off and secured against unintentional
switching on.
– Only connect the motor to a network equipped with
operating circuit breakers.
CAUTION!
Risk of burns due to hot surfaces!
Contact with hot components may cause burns.
– Do not touch the motor while it is in operation.
(temperatures up to 90 degrees!)
– Before starting any work, make sure that the
components cooled down/heated up to ambient
temperature.
NOTICE!
The strength class of the fastening screws must be at least
8.8. The correct torque and screwing depth in the housing
can be found in Table 1.
