STEP 5
:
Connect the boards for your second level in the quantity and orientation as shown below.
1.
Connect
2
x 4ft Curved Boards with Stacking Brackets on
on both ends in alternating orientation.
2.
Connect
3
x 4ft Curved Board with a top-section
4-way bracket on one end and a stacking bracket on
the other end in alternating positions as shown to
the right .
3.
Connect
4
x 4ft Curved Boards with a stacking bracket
on one end and a top 4-way bracket on the other end
in alternating orientation as shown to the right.
4.
Connect
2
x 4ft Curved boards with a stacking bracket
on end and a top-section 4-way bracket on the other end
in the same position.
5.
Connect
1
x 4ft Curved board with stacking brackets on
both sides in the top position.
6.
Connect
each of the curved
gate boards
with
stacking brackets on one end in the down
position.
7
. Connect
1
x 4ft Curved Board with a top-section 4-way
bracket on one end and a stacking bracket on the other
end in the same position.
8.
Connect
4
x 2ft Boards with mid-section 4-way brackets on
both ends in alternating orientation.
9.
Connect
2
x 2ft Boards with a stacking bracket on one end
and a top section 4-way bracket on the other end in
alternating orientation.
ASSEMBLY INSTRUCTIONS
–
Level 1 Continued
Step 2
: Layout the Boards for the first level according to the number of the
board in Step 1.
Note:
It is especially important to layout the boards in the exact orientation
shown in the diagram below.
The gate Board (
Board 3
) on level 1 is kept uncut to act as a level surface for the
gate to swing on. You can choose to cut this Board if you want it to be apart of the
swinging gate.
IMPORTANT
: If you connect any brackets incorrectly, they can be removed by
inserting a flathead screwdriver into the opening of the snap-lock plugs, pushing into
the nub and twisting upwards.
Step 3:
When connecting the boards for the first level, insert the anchor
stakes upside down so the stake is pointing to the sky. This will allow you to
adjust the shape of your frame before driving the stakes into the ground.
Step 4:
Once you finish with the adjustments of your base level frame, flip
over the stakes and hammer them into the ground.
1
1
1
1
1
1
1
1
1
6
1
2
2
3
4
5
1
2
3
4
5
6
6
7
9
8
