FRAMA AG
CH-3438 LAUPERSWIL / BERN
TITLE:
SERVICE MANUAL
SUBJECT
:
AUTOMATIC FEEDER MATRIX AF / AFS
AUTHOR(S)
:
ROLAND BÄRTSCHI (BAER)
FILE:
PER_MAN_R0102_EN_SERVICE MANUAL AF_AFS.DOC
DOC. REF:
DOC.
R01.02
CREATED
:
31.10.13 16:10
MODIFIED
:
19.11.13 13:11
PAGE
35
OF 40
10.2.
Belts
In this chapter the description for belt adjustment is given. If there is one or the other belt not to find, that
means; these belts need to be adjusted manually, by the experience of the engineer. The engineers shall
prevent to adjust the belts to thigh; this may slow down the motor to much, what may cause
malfunctions.
10.2.1.
Belt – Transport Rollers
Loose the belt spanner
(1)
by two
screws and one 5.5mm nut.
Hook in the spring balance
(2)
as
shown.
Pull the balance spring as shown, in
alight angle to the requested value.
Adjust the belt with a value of
600g
.
Screw down the belt spanner.
Figure 60: Adjustments - Belt
10.2.2.
Belt - Stack Rollers
Disconnect all connecters from the
main board.
Remove the back plate
(1)
.
Loose the belt spanner
(2)
by two
screws.
Hook in the spring balance
(3)
as
shown.
Pull the balance spring upright and
adjust the belt spanner with a value of
200g
.
Screw down the belt spanner.
Figure 61: Adjustments - Belt
3
1
2
2
1
