FRAMA AG
CH-3438 LAUPERSWIL / BERN
TITLE:
SERVICE MANUAL
SUBJECT
:
AUTOMATIC FEEDER MATRIX AF / AFS
AUTHOR(S)
:
ROLAND BÄRTSCHI (BAER)
FILE:
PER_MAN_R0102_EN_SERVICE MANUAL AF_AFS.DOC
DOC. REF:
DOC.
R01.02
CREATED
:
31.10.13 16:10
MODIFIED
:
19.11.13 13:11
PAGE
34
OF 40
10.
Adjustments
10.1.
Separation roller
Move the mechanics in upper position.
Wrap the rope of the spring balance
around the separation roller and fix it
with a tape as shown in the illustration
below.
Attach the spring balance together with
the support tool
(1)
to the upper
mechanics as shown on the illustration.
Wind up the rope until the spring
balance indicates approx. 1000g.
Figure 57: Adjustments - Separation Roller
Let the separation roller stay untouched
for approx. 30 sec.
After these 30 sec. the spring balance
should indicate a value between
500g
and
550g
.
Figure 58: Adjustments – Separation Roller
If required, adjust the separation roller
by loosen the counter-nut and turning
the allen head screw. Use a
corresponding allen wrench.
To increase the torque turn clockwise.
To decrease the torque turn
anticlockwise.
Repeat the measuring procedure till the
correct value is adjusted and tighten the
counter-nut.
Figure 59: Adjustments - Separation Roller
1
