50
PUMP FILTER
A filter system which avoids threads remaining from your laundries and tiny materials from entering the
pump during water discharging operation carried out by your machine after completing washing so
prolonging the lifecycle of your pump is available. It is recommended that you clean your pump filter once
in 2 months. To clean pump filter:
•
To open the pump cover, you can use the powder detergent spade or liquid detergent level plate coming
out of your machine.
•
Fit the end point of the plastic part to the gap of the pump cover and push it back. This will open the
cover.
•
Before opening the filter cover, settle a vessel in front of the filter cover to prevent the water remained
in the machine from flowing on the ground.
•
Loosen the filter cover in counterclockwise and then empty water.
Note: You may have to empty the water collection vessel several times according to the amount of water in
the machine.
•
Clean the foreign materials in the filter with a brush.
•
After cleaning the filter, fit the cover and tighten it by rotating it in clockwise direction.
•
While closing the pump cover, ensure that the parts on the inner side of the cover to match the holes on
the front panel side.
You can reattach the pump cover in the reverse order that you removed it.
As water in the pump may be hot, wait until it cools down.