19
6.
Replacing the bulb
Always switch off the electrical supply before carrying out any operation.
1.
Led
•
LED bulb does not operate is possible to remove as shown in Figure 9
•
A new bulb to be supplied from service points is replaced with the same reoperation.
•
Cables are designed with sockets. The plug in should be made according to previous
connection.
2.
Candle type halogen bulb
•
Bulb does not operate is possible to remove as shown in. (Figure 9)
•
A new bulb with the same features is replaced with removed bulb.
•
Remove the holder on the LED bulb. Put the new LED bulb on the holder housing of the
LED bulb you removed as shown in Figure 10
•
Device should be unplugged or switch should be turned off before cleaning and maintenance
procedures.
•
Metal filter should be cleaned once a month with hot soapy water or in the dishwasher, if possible. (60
°C)
•
Remove the aluminum cartridge filter by pressing on the spring catches on the side. Do not refit before
drying after wash.
•
Outer surface of the extractor hood should be wiped with a damp cloth soaked with soapy water.
•
Make sure electronic parts do not contact with water or similar materials.
•
For inox products, using inox cleaning and maintenance products available in the market will provide
longer usage life for your device.
•
Aluminum filters can be washed in dishwasher. After several washes, aluminum filters may change
colour. This is normal and filters do not need to be replaced.
WARNING:
When used with devices which use fuel (heaters working with gas, diesel fuel, coal or firewood, water
heaters, etc) and the air in the environment; should be used cautiously. The chimney hood sending the air out in
the environment may affect the burning adversely.
This warning is not applicable to non-ducted use.
8.
MAINTENANCE OF THE HOOD
