
36
7. Do not wash plastic and aluminium parts of your built-in hob in dishwasher.
8. Clean vinegar, lemon, salt, coke and similar acid and alkaline containing substances poured on your built-
in hob immediately.
9. In time, built in hob buttons turns hard or never turn any more, in such circumstances, it may be
necessary that buttons are changed. The change should only be done by authorized service.
You may solve the problems you may encounter with your product by checking the following points
before calling the technical service.
Check Points
In case you experience a problem about the cooker, first check the table below and try out the
suggestions.
Problem
Possible cause
Remedy
No Ignition.
No sparks.
Check power supply.
Cooker cover is not fitted properly.
Fit the cover properly.
Gas supply is closed.
Fully open gas supply.
Not Proper Ignition.
Gas supply not fully open.
Fully open gas supply.
Cooker cover is not fitted properly.
Fit the cover properly.
Ignition plug is clogged with foreign
materials.
Wipe off foreign materials with a cloth.
Hobs are wet.
Carefully dry the hobs.
Flame spreader holes are clogged.
Clean the flame spreader.
Noise coming when
burning or during
ignition.
Cooker cover is not fitted properly.
Fit the cover properly.
Flame turns off during
operation.
Flame observer device is clogged by
foreign material.
Clean flame observer device.
Overflow food turns off the flame.
Switch off the hob. Wait for one minute
and ignite again.
A strong air flow turns off the flame.
Please check related hob and check the
cooking area for air flows, for example,
from an open window. Wait for one
minute and ignite again.
Yellow flame.
Flame spreader holes are clogged.
Clean the flame spreader.
Different gas is being used.
Check the gas being used.
Unstable flame.
Cooker cover is not fitted properly.
Fit the cover properly.
Gas odour.
Hob spout left open.
Check if any hob spouts are left open.
Leakage from connection of gas
cylinder to cooker.
Make sure connections are leak-proof.
Lighter not operating.
Tips or body of ignition plugs are
clogged.
Clean tips or body of ignition plugs of
gas burners.
Gas burner pipes are clogged.
Clean gas burner pipes.
14. TROUBLESHOOTING