M.DF010-01 Manual 03/09/2021
23
OPERATING INSTRUCTIONS
1.
The Power indication light will turn on when the unit is plugged in,
regardless of whether the unit is operating or not.
2. Press
button once to start operation. Press it again to stop operation.
3. Press
to set the desired fan speed. It can be adjusted between high speed and low speed.
4. Press
button to set the desired humidity level in the room, which can be set from 40% to 80%
at 5% intervals.
After a period of working, when environment humidity is lower than the selected humidity by 2%,
compressor will stop and fan stops working 3 minutes later; When environment humidity is equal to or
higher than the selected humidity by 2%, compressor will restart once 3-minute compressor protection
time over.
5.press
button can be timer setting
：
Press the button to program the time when the unit turns on and turns off. If you want to cancel the timer
programming, press the button to adjust the time at 00, and press the button, it will be circulate from 00-
01-
02……23-24.It is the programmed time to switch the machine. The programmed time will be
cancelled when to switch compressor manually each time. The programmed time remains unchanged if
the machine stops to wok due to water full or during defrosting