PRESET MENU REFERENCE
Fractal Audio Systems MFC-101 Manual
12.1.6
Preset Custom MIDI Message
EDIT : PRESET : PAGE
(6x)
Preset Custom MIDI Message
is used to enter a 16 byte custom MIDI message to be sent with the selected preset.
You must first select a preset (
on p. 41) to edit it using this menu page.
The 16 available message bytes are spread across 4 pages of 4 bytes each. Use the
PARAMETER
footswitches to move
between the Message Page Number parameter and the 4 individual Byte parameters on each page. Bytes may contain any
values in the range 0x
00
to 0x
FF
(0 to 255).
Beginning on Message Page 1, press
PARAMETER
to select the first byte. Set the byte value with the
INCR/DECR
switches, press
PARAMETER
to move to the 2
nd
byte, and continue until you are finished or all 4 bytes of the first page are
filled.
Return to the 1
st
cursor position and use
INCR
to change to the next Message Page. Use
PARAMETER
and
INCR/DECR
to
enter byte data as above, continuing as needed across pages for up to 16 bytes total.
The cursor cannot be moved further right unless there is a valid data byte in the current position.
Only the data byte in the last position may be shut off.
Page 1 bytes:
1
2
3
4
Page 2 bytes:
5
6
7
8
Page 3 bytes:
9
10
11
12
Page 4 bytes:
13
14
15
16
The appendix of this manual includes a helpful primer on custom MIDI messages. See p. 75.
Custom 1 -- -- -- --
Содержание MFC-101 MARK III
Страница 1: ...OWNER S MANUAL MARK II Firmware Version 2 15...
Страница 2: ......
Страница 12: ......
