Fractal Audio Systems MFC-101 Manual
INTERNAL CCs
Doc v2.15
23
To set the CC# assignments for a switch:
1.
Press
EDIT
footswitch to enter EDIT MODE.
2.
Press
MIDI
footswitch to select the MIDI menu.
3.
Press
PAGE
7x to get to the
IA Switch CC# Settings
screen:
4.
Tap and/or hold the
INCR
or
DECR
footswitches to select an IA Switch
5.
Press
PARAMETER
to move to the Command Select parameter.
6.
Press
INCR
or
DECR
to select between CC Command 1 or CC Command 2.
(Each IA switch allows 2 different CC# messages, each with its own ON/OFF values).
7.
Press
PARAMETER
to move to the CC# Assign parameter.
8.
Tap and/or hold the
INCR
or
DECR
footswitches to select a CC# assignment for the selected
command. Set this value to OFF to disable the selected command.
9.
Press
PARAMETER
to move to the MIDI Channel parameter.
10.
Tap and/or hold the
INCR
or
DECR
footswitches to set a MIDI channel for the selected
command.
11.
Press
PARAMETER
2x to return to step 5 to set up a 2
nd
command for the selected IA Switch,
OR Press
PARAMETER
3x and select a different IA Switch to edit, OR press
EXIT
to return to
PERFORMANCE MODE.
The data values for IA switches is “0” for OFF and “127” for ON. The value of any switch state can be freely
changed to 0–127 or “OFF,” which causes the switch state to send nothing. For more information on setting IA
data values, see
IA Switch Control Change ON/OFF Values
on p. 54.
5.2.2
Other General Use IA Switch Capabilities
Each IA Switch can be programmed to send a Program Change when turned ON, and a second Program
Change when turned OFF. For more information, see
IA Switch Program Change Settings
on p. 54.
Each IA Switch can send a 16 Byte custom MIDI message when turned ON, and a second custom
message when turned OFF. For more information, see
on p. 55.
Each IA Switches may be given a 7-character name. This is displayed whenever the switch is turned
on
4
, as a helpful reminder in EDIT mode when the
NAMES
footswitch is pressed while the cursor is in a
parameter used to select IA Switches by their numbers. See
Chapter 11
for more information.
5.2.3
General Use IA Switch Saved States
The ON or OFF state for each General Use IA Switch is saved in each MFC-101 preset. This provides “scene recall”
capability where different presets cause different switches to turn on or off automatically. For example: you might
4
Axe-Fx IA switches
ignore
their set names while Axe-Fx mode is on, and display their function names instead.
IA01 c1 CC#102 Ch01
Содержание MFC-101 MARK III
Страница 1: ...OWNER S MANUAL MARK II Firmware Version 2 15...
Страница 2: ......
Страница 12: ......
