Fractal Audio MFC-101 MARK III, Руководство пользователя

Страница: 44 / 96

EXTERNAL SWITCHES
Fractal Audio Systems MFC-101 Manual
8 EXTERNAL SWITCHES
External footswitches provide an additional means to control your Axe-Fx or a connected MIDI device. Each switch
can be set up globally or at the preset level to send custom OFF and ON values (0 and 127 by default) for one MIDI
Control Change number.
Each External Switch jack on the MFC-101 can accept two switches via a TRS-to-dual-TS or “Insert” type cable. A
TRS cable connected to “Jack1+2” will have Switch 1 on the TIP and Switch 2 on the RING. A TRS cable connected
to “Jack3+4” will have Switch 3 on the TIP and Switch 4 on the RING. It also is possible to connect a single switch to
either one of the jacks using a TS (normal guitar) cable, but it is recommended that you disable the MIDI function
of the unused second switch (2 or 4) when doing so.
Figure 8-1: External Switch Appearance on Insert Cable Plugs
8.1 Setting Switch Hardware Types
Footswitches are classified according to the operation into several basic physical types: “TOGGLE” (a.k.a.
“Latching”) switches, and “MOMENTARY” switches (a.k.a. “hold,” subdivided into “Make” and “Break” types). All
types are supported by the MFC-101, but you must adjust MFC-101 settings according to the type of each
connected switch:
1. Press the
EDIT
footswitch to enter EDIT MODE.
2. Press
SETUP
footswitch to select the SETUP menu.
3. Press
PAGE

footswitch 13x to get to the External Switch Hardware Type screen:
4. Press the
INCR
or
DECR
footswitch to select XS1, XS2, XS3 or XS4.
5. Press
PARAMETER 
footswitch to select the Switch Type field.
6. Tap the
INCR
or
DECR
footswitches to select MOMENTARY or TOGGLE according to the physical
switch type of your connected hardware.
7. Press

PARAMETER
to return to the first cursor position and repeat this process from step 4 for
each additional connected switch, or press
EXIT
to return to PERFORMANCE MODE.
XS1 Type MOMENTARY