Fraco FRSM-8000, Руководство пользователя

Страница: 54 / 69

How to lower the platform
1-Push lever "A" to release the claws from the mast.
2-Lower lever "B" to open the claw and hold it.
3-Pull lever "A" until the claws clear the bars they were on.
4-Let go of lever "B".
5-Pull lever "A" until the claws hook up to the other bars and release the safety assembly.
6-Press on the pedal to release the safety assembly.
7-Push lever "A" to lower the platform.
8-Release the pedal to engage the safety assembly.
9-Keep pushing lever "A" until the safety assembly stops on a mast cross bar.
10-Repeat steps 1 to 9 until you reach the desired height.
the safety assembly rests on a mast cross bar
Lever "B"
V-4 FRSM-8000 user's guide 09/2002 ©FRACO Products Ltd
3-Do not use the platform if the wind exceeds 50 km/h (30mph ).
2-Check to make sure that the platform trajectory is clear of all obstacles.
planks that might interfere with the anchors.
Precautions to take before making any vertical movement with the patform
1-Tie yourself to an anchoring point or to the elevating unit and remove the
Utilisation
At the end of the lowering operation make sure that
Lever "A"