29/35
CAUTION: Do not remove the DVD until the backup process is not completely finished to prevent damage to the
optical drive.
CAUTION: Do not remove the USB device until the backup process is not completely finished.
5.3 Viewing the images:
During the backup the DVR creates two folders on the device, one containing the backup files and the other containing the
display of images (SelfPlayer). Follow the steps below to view images:
1.
Connect the backup device used on a PC;
2.
Start the software "Selfplayer" contained in the folder "
SelfPlayer
";
3.
Press the "FILE" then "OPEN";
4.
Select the file you want to display (in the folder "00001") and confirm with the button "
OPEN
".
The DVR backup splits the video into multiple files of maximum size of 100Mb which can subsequently be joined to form a
single file "avi" using the software
"AVIConverter
" provided.
6 Shut down:
Before turning off the DVR, press the “MENU” button and then "SHUTDOWN" and confirm by pressing “ENTER”. Press
"ENTER" again to request for confirmation of the command. Only when the DVR displays the message "Shutdown complete.
Now you can turn off the system, you can turn off the DVR using the appropriate key on the back panel of the DVR.
7 Appendix:
7.1 Recording table:
In order to choose the correct size of hard disk to install on the DVR is a table showing the maximum recording time at CIF
resolution (360x288) and maximum quality (9) for each type of DVR and hard drive size:
HDD (GB)
DVRVENEZIA 4 (ore)
DVRVENEZIA 8 (ore)
250
50
25
500
99
50
1000
308
150
ATTENTION: The DVR divide the HDD in two different partitions, the largest one (70% of the maximum capacity of
the HDD) is used for the normal recording and the other one (30%) for pre-alarm and pre-motion recording.
Please wait the complete start of the DVR before entering the menu, then press “
MENU
” in split-window display to call up
Menu display, than press login/logout to access to the function of the DVR.
Please before shutting down the system press “
MENU
” in split-window display to call up Menu display and press
“
Shutdown
” then, when the DVR shows “
Shutdown completed. You may turn off the system now
”, it will be possible to
power off the DVR with the apposite switch on the rear panel.
7.2 PC Network connection:
The DVR can be connect to a Ethernet or Internet network. In both case it is possible to manage more DVRs from the same PC
and the same CMS (Central Monitorating System ) or view the image and manage the output relay directly from a mobile
phone or a Web browser also different from Internet Explorer.
The first type of connection is made by a cross Ethernet cable that connect the DVR (Fig.A) and the PC or by switch, hub or a
router (Fig.B):
