FPM 627 249 Скачать руководство пользователя страница 5

Page 5 

 

 

LIMITED WARRANTY

  

 

The  factory  provides  warranty  in  compliance  with  the  Law  on  Standardization,  Regulation  on  Technical 
Standards for Agricultural Machinery (Official Gazette No. 13/2010) for each original part of the new belt hay 
rake delivered to the customer by the sales network of FPM AGROMEHANIKA d.o.o. Boljevac by which it 
guarantees  that,  at  the  time  of  delivery,  each  part  of the  belt  rake  was  new,  without  defects  in  material  and 
workmanship and that for the belt rake it provides one-year warranty from the date of delivery to the end user, 
provided  that  the  belt  rake  is  used  and  serviced  according  to  the  recommendations  for  handling  and  
maintenance stated in this MANUAL. 

 

EXCEPTIONS: 
 

1.

 

Parts made of wood are not covered by warranty 

2.

 

Parts not manufactured by FPM

 

Agromehanika d.o.o. Boljevac (tires, plastics, etc.). These items are 

not covered by this warranty but by the warranty of the corresponding producers; 

3.

 

Parts that are normally worn during exploitation such as collecting elements.  

4.

 

The  warranty  expires  in  case  of  misuse,  improper  or  careless  use  or  damage  in  an  accident.  The 
warranty  becomes  invalid in  case  of  use  of  non-original  parts  and  the  factory  is  not  responsible  for 
damages caused in transport. 

 
THE FACTORY IS NOT RESPONSIBLE FOR THE LOSS OF PROFITS DUE TO FAILURE OF 
THE BELT HAY RAKE, OR  INJURY OF ANY THIRD PARTY, OR  FOR ANY ADDITIONAL 
COSTS OF WORK ON REMOVAL AND REPLACEMENT OF PARTS. 
 

Customer is responsible for and bears the costs of the following:  

 

1.

 

Regular maintenance, such as lubrication, the oil fill, minor adjustments, etc. 

2.

 

Transport  of  the  belt  rake  to  the  place  where  the  service  is  provided  during  the  warranty 
period and back. 

3.

 

Travel time of the authorized servicer to the owner of the belt rake and back, or delivery and 
return of the belt rake from the service workshop after repair. 

 
This  warranty  does  not  apply  to  the  belt  rake  that  was  changed  or  modified  without  our  explicit 
permission or was repaired by someone else, outside of authorized service. 
 
The warranty refers to strict compliance to the warning: 

-

 

All instructions in this Manual must be observed and all the parts should be regularly checked 
and replaced, if necessary. 

 
No warranty is provided for products that are not new. 
 
Persons who only work in our factory are not official representatives of the factory and have no right 
to take any obligation on its behalf. 

No warranty covers equipment for the products broader than the provided one, therefore the factory 
is not responsible for injuries resulting from such use.

 

 
 
 

Содержание 627 249

























Отзывы: