11
3.1 INSTALLATION OF THE LEFT AND RIGTH INTER-BEARING TO THE CONNECTION STRUCTURE
Install the inter-bearing structure (figure 1, position 1) to the connection structure (position 2) and secure it with the small axle
(position 3) and the clip (position 4).
Figure 1
3.2 INSTALLATION OF THE MAIN FRAME TO THE INTER-BEARING
For installation of the main frame (Figure 2 pos. 1) to the inter-bearing (pos. 2), first remove the clip and the flat washer from
the sleeve of the main frame (pos. 3 and 4), then pull the sleeve in the opening and secure the connection by placing the flat
washer and clip on the sleeve. Bend the ends of the clip.
.
Figure 2
3
2
4
1
4
3
1
2
RIGHT SIDE
LEFT SIDE
