Page | 8
INFORMATION FOR PROPER READING OF THE MANUAL
In this manual “left” and “right” is defined in terms of
the driving direction.
A – Front part
B – Rear part
C – Left side
D – Right side (marks
are shown in Figure 1)
Metric thread is used during installation. Tighten all
screws during installation.
Letters are used for each figure to indicate where to
install items.
Carefully read the text to properly install the mulcher
DESCRIPTION OF THE TOOL
SIDE PLANT RESIDUE SHREDDERS – MULCHERS:
FPM 618 192 / 193 / 194 – working width 1,6 / 1,8 and 2,0 m
are group of tools designed for mechanical shredding of plant residue on all agricultural, public, abandoned or uncultivated
areas. They can be used for shredding grass, plant residue, work along the roads, in canals, for shredding of branches in
orchards, residues after pruning of vine in vineyards, after harvesting of field crops, etc. This results in improving of the
quality and fertility of the soil and decreasing the use of artificial fertilizers.
Constructive solution is quite robust, customized for intensive work and has the possibility of mechanical
lateral movement.
Standard plant residue shredder – mulcher is connected to the rear part of the tractor.
For heavy-duty operations it is recommended to use hammer-blades, and for other, less heavy-duty
operations, universal Y blades are used for shredding grass and other plant residues.
Double spiral rotor with 45
º
- with its distribution of working bodies, which is installed in these models consumes
much less energy, so that it takes less tractor power, and the load on the vital parts of the shredder is much lower.
Multiplier (for 540º/min) has a built-in one-way coupling.
Three-point linkage for tractors: category I and II and the capacity of lateral movement in relation to the
axis of the tractor. Standard equipment includes the following: front security guards (flaps), height adjustable
roller, and selection of working bodies – hammer or universal (Y) blade.
PARTS OF PLANT RESIDUE SHREDDER
1.
Mainframe (housing) of mulcher
2.
Multiplier
3.
Lateral belt transmission
4.
Cardan shaft guard
5.
Connecting frame of mulcher
6.
Cardan shaft holder
7.
Supporter
Содержание 618 192
