FPM Agromehanika 618 192, Установка/Обращение/Обслуживание

Страница: 17 / 36

Page | 17

by releasing the hydraulics, lower the tool to the ground

turn off the tractor engine and pull the parking brake

make sure that all parts of the tools are motionless
Only after checking the above mentioned operations the operator can leave the driver's seat
PARKING OF THE TOOL

After completion of work you must park the tool on the flat area

Stop the tractor engine and pull the parking brake

When the tractor engine is turned off and all moving parts on the tool are in standby mode, remove the
cardan from the tractor output shaft

Unhook the tool from the tractor.
ATTENTION:
The place where the tool is parked must be:
- Dry
- Sheltered from bad weather conditions
-
Protected or locked to prevent access by children or unauthorized persons
CAUTION:
If you do not use the tool for a long period of time, lubricate all parts that are subject to
wear and tear, lift the tool on a wooden stand located under the canopy or in a special dry
room and cover it with plastic foil.
If you have carefully performed all the activities, then the tool is mobile and ready when there is the need to
use it again.
MAINTENANCE
REGULAR MAINTENANCE
Remember that lower maintenance costs and a longer life span of the tool depend on the constant observance
of the provided instructions.
ATTENTION:
Before you start any operation, make sure the tool is parked on the flat area.
Secure the tool against moving by placing supporters under wheels.
Maintain, adjust and prepare the tool for work only when cardan shaft is removed from the tool.
The frequency of servicing suggested in this Manual, refer to the normal conditions of use.
Servicing must
be carried out more frequently in severe conditions of use.
CAUTION:
Before you inject grease, you need to use a dry cloth to wipe around the grease box and the
box itself to avoid that the mud and dust mixed with grease reduce quality of greasing.
Do the greasing with maximum caution, because injecting large quantities of grease under pressure can
damage the protection of bearings. Grease all the places designed for greasing.
DANGER:
Keep all the lubricants out of reach of the children!