FPG IN 5H08, Руководство по эксплуатации продукта

Страница: 18 / 32

Part No. 26108 Rev. C December 2015
- 18 - 5000 Series Cabinets
SERVICING
Lighting
HEATED CABINETS - SERVICING
Caution DO NOT service lights without isolating the cabinet at the main switch or
unplugging it from the wall.
Control Gear
Chassis The control gear, including the LED lighting power
supplies, is located behind the left hand rear panel.
All low power circuits are protected by a circuit
breaker, MCB, which can be operated via a cut-out in
the top of the chassis.
Test Lighting
Components
Before replacing an LED strip, check that the power supply is working.
If there is no dc voltage at the output, the power supply should be replaced.
Access to LED
Strips
The LED strips are protected with
plastic covers. These clip into grooves
in the aluminium extrusion.
Remove the plastic cover to access the
LED strip.
The top light assembly is similar to the
shelf lights, but the correct
replacement unit must be used.
LED Strip
Replacement
Individual LED modules cannot be
replaced. A complete light unit must be
used.
Connection is made with a plug and
socket. Disengage the supply lead from
the metalwork, and re-assemble it to the
replacement unit.