Mailing system
Opti
mail 30 – Service documentation
Zac Moody/Andrew Nagel Revision June 2005 optimail30 service mode chapter2 (dealer)
Page
6
FRANCOTYP-POSTALIA
S8: Modem test
The modem makes a test connection to the IBIP server. Must be connected to the telephone line and the
correct dialing parameters programmed
The result is shown in the field “Overall Status”
Option:
Button Name
Function
S1 Start
S3 Cancel
S9: Interface test
Serial interface cannot be tested at this time.
A special adapter is necessary but is unavailable.
S10: Card Reader Test
The following functions are tested
•
Card detection – Inserted or not
•
Reading/writing on master card. Must use a blank MasterCard
S11: Audible signal test
The beeper is tested
S12: Security Device Echo Test
Internal communication test (= ECHO-Test) between the main board and the security module. The result is
shown in the display. The goal is that all cycles pass with out an error. To exit press “Cancel”
S13: Secure Echo (remote)
Communication test between the security module and the IBIP server via modem. The telephone line must be
connected. The result is shown in the display.
S14: Self Test
The security module makes an internal test procedure. The results are shown in the display.
