FP 50.0070.0001.00 Скачать руководство пользователя страница 9

Страница: 9 / 98

For your safety

Before starting work on the FP S-ENGuard:



Make sure that the device is voltage-free.



Observe the safety and accident prevention regulations applicable for the specific

application and location.

Before putting the FP S-ENGuard back into operation:



Make sure that the protective cover for the power supply is properly attached.



Close the cover.



Make sure that the device is closed correctly.

2.3

How to avoid damage to property

Observe the following instructions to avoid damage to the device, the peripherals and

potential consequential damage:



Only use the device in enclosed and clean spaces.



Avoid harmful environmental conditions such as heat, sunlight, strong shocks and

vibrations.



Please note the special instructions for handling the SIM card.



Protect the interfaces from electrical damage by avoiding mixing up connections.



Use a torque screwdriver to avoid mechanical damage to the connections.



Protect the outputs from destruction by observing the maximum output loads in

accordance with the specification.



Ensure that the supply voltage and earthing is connected correctly (L, N, PE, com-

pliance with the characteristic values, sufficient cable cross-section).



Only carry out a software update if no peripherals are connected.



Ensure the correct termination of the end devices. Incorrect or missing termination

can lead to communication problems.

Содержание 50.0070.0001.00



































































































Результаты поиска

Содержание 50.0070.0001.00

Отзывы:

Похожие инструкции для 50.0070.0001.00

Бренды по названию

Популярные бренды

FP 50.0070.0001.00, Руководство по настройке

Результаты поиска

Содержание 50.0070.0001.00

Отзывы:

Похожие инструкции для 50.0070.0001.00

Бренды по названию

Популярные бренды