background image

Installing the FP S-Compact

25

Step 8: Connecting to the power supply

Removing the protective cover 

The protective cover is fastened in place with a snap hook on 

both the left and right sides. 

 Removing the

protective cover

First loosen the fastening on the right side: Insert a slotted 

screwdriver into the ‘OPEN 1’ opening and press the snap 

hooks gently outwards (towards the arrow).

Danger to life through electric shock! 

There is danger to life when touching live parts. 

Disconnect the cables to which the device is connected from 

the power supply and secure them against being switched on 

again. 

Check that the cables to which the device is connected are 

voltage-free.

Do not connect the power supply until all other installation 

work has been completed.

Danger to life through electric shock when operating on an 

unsuitable electrical system! 

Connect the device only to a properly installed electrical system 

that has an easily accessible, all-pole (L,N) disconnect device 

equipped with a minimum contact spacing of 3 mm (0.12").

Snap hook

Protective cover

Snap hook

Slotted screwdriver

Содержание FP S-Compact BB





























































Отзывы: