32
NT650Elite Multi-Application Service Tool Manual_English_V1.01
7 OBDII/EOBD Operations
OBDII/EOBD
menu lets you access all OBD service modes. According to ISO 9141-2, ISO 14230-4,
and SAE J1850 standards, the OBD application is divided into several sub programs, called ‘Service
$xx’. Below is a list of OBD diagnostic services:
●
Service $01
- request current powertrain diagnostic data
●
Service $02
- request powertrain freeze frame data
●
Service $03
- request emission-related diagnostic trouble codes
●
Service $04
- clear/reset emission-related diagnostic information
●
Service $05
- request oxygen sensor monitoring test results
●
Service $06
- request on-board monitoring test results for specific monitored systems
●
Service $07
- request emission-related diagnostic trouble codes detected during currentor
last completed driving cycle
●
Service $08
- request control of on-board system, test or component
●
Service $09
- request Vehicle Information
When OBDII/EOBD application is selected from Home screen, the scanner starts to detect the
communication protocol automatically. Once the connection has established, a menu that lists all of
the tests available on the identified vehicle displays. Menu options typically include:
●
System Status
●
Read Codes
●
Freeze Frame Data
●
Clear Codes
●
Live Data
●
I/M Readiness
●
O2 Sensor Test
●
On-board Monitor Test
●
Component Test
●
Vehicle Information
●
Modules Present
●
Code Lookup
NOTE
Not all function options listed above are applicable to all vehicles. Available options may vary by the
year, model, and make of the test vehicle. A “Not supported the mode!” message displays if the option
is not applicable to the vehicle under test.
8 System Setup
This section illustrates how to program the scanner to meet your specific needs.
When
Settings
is selected, a menu with available service options displays. Menu options typically
include:
●
Language
●
Unit
●
Shortcuts
●
Beep Set
●
Display Test
●
Keypad Test
●
About
8.1 Select Language
Selecting
Language
opens a screen that allows you to choose system language. The scan tool is set
to display English menus by default.
To configure system language:
