VDC-30 Long Range Video/Data/RC Wireless Transmission System
User Manual
©
2020 FOXTECH All Rights Reserved
16
14×Select Working mode: There are two working mode of VDC-30——Point to Point mode and
Repeater mode. Choose the working mode you needed×and click ‘Set’ button to complete setup. Click the
‘Get’ button to get current working mode. This function only needs to be set up on the
M51 air unit. The ground unit can synchronize automatically. If you select Repeater mode, you need to
select the air unit whether it is TX or repeater.
How to use Maestro Assistant
1.Connect VDC-30 with Maestro Assistant×
Maestro Assistant is a Windows software that configures VDC-30. Before configuration, please connect the
UART1 to computer via UART(TTL) to USB converter.
Select the right COM and baud rate. Click ‘open’ button.
2.Read current parameter×
After step1, click ‘Read’ button. All current parameter will print on the information display. Because the
Working mode is only for air unit. The Working mode box will turn grey on ground unit configuration.
Frequency Band
The VDC-30 frequency band has been set. User can not change.
You can click ‘Get’button to get current frequency band.
Bandwidth
There are four BW to be selected——3MHz/ 5MHz/10MHz/20MHz.
The greater the BW, the more
data can be transmitted, but the weaker the
anti-interference. In Fixed frequency mode, VDC-30 will have more
frequency to fix with small BW.
