VDC-30 Long Range Video/Data/RC Wireless Transmission System
User Manual
©
2020 FOXTECH All Rights Reserved
15
Maestro Assistant
Interface of Maestro Assistant
Function description×
×1×Information display×display status information for the VDC-30×
×2×UART(COM) select×Select the right COM number of the computer to connect VDC-30. If you want to
change to another COM , please click the ‘Refresh’ button.
×3×Baud rate select×Select the right baud rate for the COM. Make it the same as VDC-30 UART1.
×4×Open COM button.
×5×Close COM button.
×6×Read current parameter button×click this button to get the current parameter of device×
×7×Clear window button: to clear the information display.
×8×Select frequency×The VDC-30 frequency band has been set. User cann’t change. You can click
‘Get’button to get current frequency band.
×9×Select BW×There are four BW to be selected——3MHz/5MHz/10MHz/20MHz. Choose the BW you
needed×and click ‘Set’ button to complete setup. Click the ‘Get’ button to get current BW.
10×Select Power Level×There are three power level to be selected——High/Mid/Low Choose the power
level you needed×and click ‘Set’ button to complete setup. Click the ‘Get’ button to get current power level.
11×Select baud rate×You can select the right baud rate for VDC-30 Uart1 in this box.
Choose the baud rate you needed×and click ‘Set’ button to complete setup. Click the ‘Get’ button to get
current baud rate.
12×Select hopping mode: There are two mode to be selected——Hopping/Fixed. Choose the mode you
needed×and click ‘Set’ button to complete setup. Click the ‘Get’ button to get mode.
When you select Fixed mode, you need to choose a fixed frequency below. The fixed frequency is related
to frequency band and BW.
13×Select Encryption: You can disable/enable the encryption. When enable this function, you
can set your private password. The password should in the range of 100000~999999. Devices with different
password do not link.
