Foxtech Halo-6000, Руководство по эксплуатации

Страница: 8 / 10

8 . UAV using Halo-6000
Halo-6000 supports 14S battery, and it has voltage protection function, i. e. the system
will automatically stop to protect when the voltage is continuously lower than 47.6V or higher
than 61.6V. The hybrid system will have a certain voltage disturbance on the DC bus at the
moment of generator startup. The equipment voltage level of the DC bus of the UAV should be
above 70V to prevent disturbing your equipment at the moment of motor startup. It is
recommended to add filtering capacitors to the DC bus to ensure the safety of the equipment.
Figure 1 below shows the effect of adding 330uF/100V capacitors to the bus.
Num. V of
E ach
Unit
Fully
Charged
Protect
Voltage
Protect
Time
Note
1 4.35V 58.5V 61.2V 10s
Once over the
protection voltage
or longer than the
protection time,
the system will
shut down.
2 4.25V 57.4V 60V 10s
3 4.2V 57.4V 59V 20s
Rectifier
Bridge
Magnet
Ring
Capacitor
Battery
Measure Point
A B C D
Without
Capacitor
82 V 63 V 63V 63V
330uF
Capacitor
74 V 61V 55 V 53 V
Halo-6000 EFI Generator Usage Precaution
©2022 FOXTECH All Rights Reserved 6