Foxpro Scorpion X1-C, Инструкция по эксплуатации

Страница: 11 / 19

11
removing the red shunt and replacing it on the two pins to the right, the audio is routed to the
external speaker jacks only.
5. TX9 Detailed Information
The Scorpion X1C features the TX9 remote control. The TX9 includes a graphic display (no
printed sound lists), two custom preset buttons that provides you with one button access to
your most commonly used sounds, volume level indicator, recall button, an elapsed timer, and
battery level indicator for the transmitter battery.
The most basic operational steps for the TX9 were covered in Chapter 2. The following section
includes all other aspects.
5-1 Recall Button
The recall button remembers the last sound and volume level that you were operating with. For
example, if you are playing sound 001 at volume 9, and then switch to sound 002 at volume 5,
by pressing the recall button you will jump back to sound 001 and volume 9.
5-2 Elapsed Timer
The elapsed timer allows you to see how long you have been on a stand. The timer starts as
soon as you turn on the TX9 transmitter. You can reset the timer by pressing the Auxiliary and
Sound Up buttons simultaneously. The timer will automatically reset to 00:00 if it is allowed to
continue beyond the 99:59 mark.
5-3 FOXBANG
When enabled, FOXBANG will play your first preset sound upon discharging of your firearm. For
example, if you normally switch to a preset of a ki-yi or pup distress after making a shot,
FOXBANG can automatically play that preset for you without the need for intervention.
FOXBANG has 5 sensitivity
levels which are set via the
TX-9 transmitter (lowest,
low, medium, high, and
highest). FOXBANG status
will be shown in the upper
left-hand corner of the
display.
Turning FOXBANG On and Off
1. To turn FOXBANG on, simultaneously press the Sound Up and Down buttons on your
TX-9. Repeat this step to turn FOXBANG off.