Foxfury Lighting Solutions 200-800, Руководство по эксплуатации продукта, Страница: 6 / 20

6
AC-DC ADAPTOR AND INTERNATIONAL USE
The Nomad
®
Series has a AC-DC Adaptor which uses AC Cables like those
used in desktop computers or monitors. With every Nomad
®
, FoxFury supplies
a cable that terminates in the USA standard 110 VAC plug.
The plug of the AC Cable should be country specific. Example: IEC Types A-N.
The Female Connector side of the AC Cable must be IEC Type C13 to mate
with the Male Inlet of the AC-DC Adaptor.
ON/LOW mode: Press the Power/Mode Switch once.
MEDIUM mode: From LOW mode, press the Power/Mode Switch once.
HIGH mode: From MEDIUM mode, press the Power/Mode Switch once.
FLASHING mode (excludes Nomad
®
P56): From HIGH mode, press the
Power/Mode Switch once.
OFF: From HIGH/FLASHING mode, press the Power/Mode Switch once.
NOTE: The light does not retain the mode in memory. Once the light is ON,
re-select the mode desired.
OPERATIONAL MODES
AC CABLE
TYPE B
10A (250V)
INLET (MALE) (C14 IEC)
(LOCATED AT END OF
ADAPTOR)
CONNECTOR
(FEMALE) (C13 IEC)
(VIEW OF CABLE END)
AC-DC ADAPTOR
BARREL CONNECTOR
CONNECTOR (FEMALE) AC PLUG
MUST BE IEC C13
CONNECTOR
CAN BE ANY PLUG
IEC TYPES A-N
AC CABLE
10A (250V)