Foxfury Lighting Solutions 200-4N32, Руководство по эксплуатации продукта, Страница: 12 / 18

12
REMOVING THE BATTERY PACK | 4 MINS
(APPROX)
At the end of the Battery Packs's life (which is about 500+ full charges), the
Battery Pack will stop holding a charge and will need replacing.
Make sure the Nomad
®
is turned OFF before starting.
1. Begin with the back of the Nomad
®
facing you. Locate the eight (8)
screws on the rear panel.
2. Use a Phillips Head (+) #1 screwdriver to unscrew and remove the eight (8)
screws. Then, remove the rear panel.
3. Once the rear panel is removed, notice a black strap, which holds the
Battery Pack in place. There is one (1) screw on each side of the strap.
Remove both using the same Phillips Head screwdriver. This will then
release the Battery Pack strap.
4. Pull the Battery Pack out of the Nomad
®
Body. Then, detach it from the
light by unclipping the Connector.
1
1
2
3
4
3
2
4
MAINTENANCE
CONNECTOR