Foxconn Z75A Series, Руководство пользователя

Страница: 41 / 108

BIOS SETUP
34
Adjusting the voltage beyond the memories default voltage could result in damage to
memory controller.
►CPU VSA Voltage
This item is used to set the CPU VSA voltage.
► PCH Core Voltage
This item is used to set the PCH Core voltage.
► CPU VTT (Uncore) Voltage
This item is used to select the CPU VTT (Uncore) voltage. [Default] means the voltage is
according to your CPU model.
► CPU VCore Voltage Offset
This item is used to set the CPU VCore power Voltage offset.
Hardware Monitor
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Hardware Monitor
Case Intrustion Alert [Disabled]
CPU FAN Mode [Automatic Mode]
FAN Off Temp Limit 20
FAN Start Temp Limit 25
FAN Start PWM 26
PWM Slope Setting [0.5 PWM]
CPU Temperature : +41 C
CPU FAN Speed : 2536 RPM
System FAN Mode [Automatic Mode]
FAN Off Temp Limit 20
FAN Start Temp Limit 25
FAN Start PWM 26
PWM Slope Setting [0.5 PWM]
System Temperature : +38 C
System FAN Speed : N/A
▶ Hardware Voltage Monitor
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable a warning message once
the case intrusion alert has
been triggered
OC Plus
► Case Intrustion Alert
This item is used to enable or disable case open warning function.
► CPU FAN Mode / System FAN Mode
This item is used to select the mode of CPU FAN/System FAN. Only when this option is
enabled, you can set some correlative parameters. “Automatic Mode” is the principle figure
of CPU/System fan function for your reference. The CPU fan/System fan speed are auto-
matically detected and displayed by the system.
► FAN off Temp Limit
It allows you set a temperature value from which smart fan stop its operation.
► FAN Start Temp Limit
It allows you set a temperature value from which smart fan starts its operation.
► FAN Start PWM
It allows you to set an initial PWM value to drive the fan when the temperature reaches Start
value and smart fan begins its operation. The higher PWM value can achieve the faster fan
speed.
► PWM Slope Setting
It controls the PWM value being stepped up or down versus temperature changes.