Foxconn Z75A Series, Руководство пользователя

Страница: 40 / 108

BIOS SETUP
33
► Memory Clock Multiplier
This item is used to set the memory clock multiplier.
► Memory Multiplier
This item is used to set the memory multiplier ratio.
► CAS# Latency(tCL)
This item dispalys the CAS Latency time. The CAS Latency is the number of clock cycles
that elapse from the time the request for data is sent to the actual memory location until the
data is transmitted from the module.
► Row Precharge Time(tRP)
This item dispalys the DRAM RAS precharge time (in clock cycles).
► RAS# to CAS# Delay(tRCD)
This item dispalys the delay time (in clock cycles) between the CAS and RAS strobe signals.
► RAS# Active Time(tRAS)
This item dispalys the precharge delay time (in clock cycles).
► Write Recovery Time(tWR)
This item allows you to select the write recovery time (in clock cycles).
► Row Refresh Cycle Time(tRFC)
This item allows you to select the minimum refresh recovery time (in clock cycles).
► Write to Read Delay (tWTR)
This item allows you to set minimum Write-to-read delay (in clock cycles).
► Active to Active Delay (tRRD)
This item allows you to set Active to Active Delay (in clock cycles).
► Read CAS# Precharege(tRTP)
This item is used to set the read CAS to precharge time (in clock cycles).
►Four Active Window Delay(tFAW)
This item is used to set the four active window delay time (in clock cycles).
Voltage Configuration
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Voltage Configuration
DRAM Voltage [Default]
CPU VSA Voltage [Default]
PCH Core Voltage [Default]
CPU VTT (Uncore) Voltage [Default]
CPU VCore Voltage offset [Default]
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
The minimum available for
adjustment is 1.307V.
The maximum available for
adjustment is 2.006V.
The default voltage is 1.553V.
Adjusting the voltage beyond
the memories default voltage
could result in damage to
memory controller.
OC Plus
► DRAM Voltage
This item is used to set the DRAM voltage. The maximum available for adjustment is 1.307V.