Foxconn P4M800P7MB Скачать руководство пользователя

Страница: 53 / 81

Chapter 3 BIOS Description

IRQs Activity Monitoring Menu

Primary INTR

Selecting

“

”

will cause the system to wake up from power saving modes

if activity is detected from any enabled IRQ channels. The setting values

are: ON and OFF.

IRQ3 (COM2)

This option is used to enable or disable IRQ3 (COM2) activity monitoring. The
setting value are: Disabled and Enabled.

IRQ4 (COM1)

This option is used to enable or disable IRQ4 (COM1) activity monitoring. The
setting value are: Disabled and Enabled.

IRQ5 (LPT2)

This option is used to enable or disable IRQ5 (LPT2) activity monitoring. The
setting value are: Disabled and Enabled.

IRQ6 (Floppy Disk)

This option is used to enable or disable IRQ6 (Floppy Disk) activity monitoring.
The setting values are: Disabled and Enabled.

IRQ7 (LPT1)

This option is used to enable or disable IRQ7 (LPT1) activity monitoring.

The

setting value are: Disabled and Enabled.

IRQ8 (RTC Alarm)

This option is used to enable or disable IRQ8 (RTC Alarm) activity monitoring.
The setting values are: Disabled and Enabled.

IRQ9 (IRQ2 Redir)

This option is used to enable or disable IRQ9 (IRQ2 Redir) activity monitoring.
The setting values are: Disabled and Enabled.

PDF created with pdfFactory Pro trial version

www.pdffactory.com

Содержание P4M800P7MB


















































































Результаты поиска

Содержание P4M800P7MB

Отзывы:

Похожие инструкции для P4M800P7MB

Бренды по названию

Популярные бренды

Foxconn P4M800P7MB, Руководство пользователя

Результаты поиска

Содержание P4M800P7MB

Отзывы:

Похожие инструкции для P4M800P7MB

Бренды по названию

Популярные бренды