Foxconn P4M800P7MB Скачать руководство пользователя

Страница: 30 / 81

Chapter 3 BIOS Description

Award (Phoenix) BIOS can support 3 HDD modes: CHS, LBA and Large or Auto mode.

CHS

For HDD<528MB

LBA

For HDD>528MB & supporting LBA (Logical Block Addressing)

Large

For HDD>528MB but not supporting LBA

Auto

Recommended mode

Drive A

This option allows you to select the kind of FDD to be installed, including

“

None

”

[360K, 5.25 in], [1.2M, 5.25 in], [720K, 3.5 in], [1.44M, 3.5 in] and [2.88 M, 3.5 in].

Video

The following table is provided for your reference in setting the display mode for

your system.

EGA/VGA

Enhanced Graphics Adapter / Video Graphic Array. For

EGA, VGA, SEGA, SVGA, or PGA monitor adapters.

CGA 40

Color Graphic Adapter, powering up in 40 column mode.

CGA 80

Color Graphic Adapter, powering up in 80 column mode.

MONO

Monochrome adapter, including high resolution monochrome adapters.

Halt On

This category determines whether or not the computer will stop if an error is
detected during powering up.

All Errors

Whenever the BIOS detects a nonfatal error, the system
will stop and you will be prompted.

No Errors

The system boot will not stop for any errors that may
be detected.

All, But Keyboard

The system boot will not stop for a keyboard error; but
it will stop for all other errors.

All, But Diskette

The system boot will not stop for a diskette error; but
it will stop for all other errors.

All, But Disk/Key

The system boot will not stop for a keyboard or disk
error, but it will stop for all other errors.

PDF created with pdfFactory Pro trial version

www.pdffactory.com

Содержание P4M800P7MB


















































































Результаты поиска

Содержание P4M800P7MB

Отзывы:

Похожие инструкции для P4M800P7MB

Бренды по названию

Популярные бренды

Foxconn P4M800P7MB, Руководство пользователя

Результаты поиска

Содержание P4M800P7MB

Отзывы:

Похожие инструкции для P4M800P7MB

Бренды по названию

Популярные бренды