Chapter 3 BIOS Description
23
2.7 Boot Up Floppy Seek
This item controls whether the BIOS checks for a floppy drive while booting
up. If it cannot detect one (either due to improper configuration or physical
unavailability), it will appear an error message. Disabled this function,POST
will not detect the floppy.
2.8 Boot Up NumLock Status
This item defines if the keyboard Num Lock key is active when your system is
started. The available setting values are: On and Off.
2.9
Gate A20 Option
This option is used to set up the A20 signal control necessary for system is
started.
2.10 Typematic Rate Setting
If this item is enabled, you can use the following two items to see the typematic
rate and the typematic delay settings for your keyboard.
2.11 Typematic Rate (Chars/Sec)
Use this item to define how many characters per second a hold-down key
generated.
2.12 Typematic Delay (Msec)
Use this item to define how many delayed milliseconds before a hold-down
key begins generating repeat characters.
2.13 Security Option
When it is set to
“
Setup
”
, a password is required to enter the CMOS Setup
screen; When it is set to
“
System
”
, a password is required not only to enter
CMOS Setup, but also to start up your PC.
2.14 APIC Mode
This item is used to enable or disable APIC function.
2.15 MPS Version Control For OS
This item is used to set up the version of MPS Table used in OS.
2.16 OS Select For DRAM>64MB
This item is only required if you have installed more that 64MB of memory and
you are running the OS/2 operating system.
2.17 Report No FDD For WIN 95
If you are using the Windows 95 and running a system with on floppy drive,
select
“
Yes
”
for this item to ensure compatibility with Windows 95 logo
certification.
文件使用
"pdfFactory"
试用版本创建
Æ
Æ
www.fineprint.com.cn