Chapter 2 Installation Instructions
12
This motherboard includes connectors for FDD device, IDE device,Serial ATA
devices, USB devices, IR module and others.
FDD Connector: FLOPPY
This motherboard includes a standard FDD connector, supporting 360K, 720K,
1.2M, 1.44M, and 2.88M FDDs.
IDE Connectors: PIDE
This connector support the provided Ultra DMA133/100/66 IDE hard disk ribbon
cable and you can configure as a disk array through RAID controller.
Front Panel Connector: FP1
This motherboard includes one connector
for connecting the front panel switch and
LED indicators.
Hard Disk LED Connector (HDD-LED)
The connector connects to the case
’
s IDE indicator LED indicating the activity
status of hard disks.
Reset Switch (RESET)
Attach the connector to the Reset switch on the front panel of the case; the
system will restart when the switch is pressed.
Power LED Connector (PLED)
Attach the connector to the power LED on the front panel of the case. The Power
LED indicates the system
’
s status. When the system is in S0 status, the LED is
on. When the system is in S1 status, the LED is blink; When the system is in S3,
S4, S5 status, the LED is off.
Power Switch Connector (PWRSW)
Attach the connector to the power button of the case. Pushing this switch allows
the system to be turned on and off rather than using the power supply button.
Attention:
If you install only one device on the IDE port such as a hard disk or
a CD _ROM, please configure it as a master device.
Other Connectors
NC
HDD_LED
RESET
PLED
PWRSW
+
-
9
2
FP1
!
+
-
Empty
1
10
文件使用
"pdfFactory"
试用版本创建
www.fineprint.com.cn
