background image

2

1

1-1 Product Specifications

CPU 

 Support LGA775 socket Intel

® CPU:

 

 Core

TM

 2 Quad / Core

TM

 2 Extreme /  Core

TM

 2 Duo /

 

 Pentium® Dual-Core / Pentium® D / Pentium®

 4 / 

 

 Celeron® processors

 

 Future-proof supporting for 45nm processors

Front Side Bus 

 1333/1066/800MHz FSB      

Chipset 

 NVIDIA GeForce 7100 / nForce 630i Chipset

Memory  

 2 x 240-pin DDR2 DIMM sockets

 

 Support up to 4GB of system memory

 

 Single channel DDR2 1066(oc*)/800/667/533MHz architecture

 

 (oc*: overclocking)

Audio 

 Realtek 6-channel audio chip (M7PMX-K)

 

 Realtek 8-channel audio chip (M7PMX-S)

 

 High Definition Audio

 

 2/4/5.1/7.1-channel

 

 Support Jack-Sensing function

LAN                                Realtek Gigabit LAN chip
Expansion Slots   

 1 x PCI Express x16 slot

 

 1 x PCI Express x1 slot

 

 2 x PCI slots

Onboard Serial ATA 

 4 x SATA connectors

 

 300MB/s data transfer rate

 

 Support hot plug and NCQ (Native Command Queuing )

USB 

 Support hot plug

 

 Support up to 8 x USB 2.0 ports (4 rear panel ports, 2 onboard USB

 

 connectors supporting 4 extra ports)

 

 Support USB 2.0 protocol up to 480Mb/s

Internal Connectors 

 1 x 24-pin ATX main power connector

 

 1 x 4-pin ATX 12V power connector

 

 1 x Floppy disk drive connector

 

 1 x IDE connector

 

 4 x  SATA connectors

 

 2 x USB 2.0 connectors (supporting 4 x USB devices)

 

 1 x CPU fan header (4-pin)

 

 1 x System fan header (4-pin)

 

 1 x Front Panel connector

 

 1 x CD_IN connector

 

 1 x Front audio connector 

 

 1 x COM1 connector 

 

 1 x Speaker Connector (or Buzzer ) 

 

 1 x IrDA connector 

 

 1 x Chassis intrusion alarm header (INTR)

 

 1 x S/PDIF_OUT connector

Содержание M7PMX series User's













































































































Отзывы: