3. In Figure 2.2 ,select“ TCP/IP” and then click “search”, you will see Figure 2.3.
Figure 2.3
Icon show
Set Config: set device’s network parameters
Get Config: get device’s network parameters
Config: fill in network parameters including in IP, Mask and Gateway.
4. Click “OK” to get all UHF reader devices .You choose every device by clicking the MAC ,then click “Get Config” to
gain device’s network parameters .After getting device’s network parameters ,you can fill in what you want to
set ,then click “Set Config”.
And click “open” to connect network, if success, UHF reader will show you “Init OK” and firmware
version .UHF reader will automatically search corresponding ant port .see in Figure 2.4.
Figure 2.4
1
)
)
)
)
Inventory
a. Pander data display option .You can select appropriate option, such as you’d better pander “Multiple lines
while different antennas” with multi-ant ports.
b. Make UHF tags dead against the center of the antenna.
c. Click “Inventory” and “Inv Once”. Show you in Figure 2.5.
d. Click “Stop” to complete inventory.
Figure 2.5
Содержание CMC181
Страница 1: ...UHF Reader User Manual...