49
3
► Read to Precharge (tRTP)
This item is used to set the read CAS to precharge time (in clock cycles).
► All Precharge to Refresh
All Precharge to Refresh
This item is used to set the all precharge to refresh delay(in clock cycles).
► Refresh Period Ratio
This item is used to set refresh period ratio.
► Refresh Period (tREF)
This item is used to set refresh period(in clock cycles).
► Command Per Clock
Per Clock
This item is used to set the Command per clock for your memory (in clock cycles).
► Read Delay Phase (tRD)
This item is used to set the read delay phase (in clock cycles).
All Voltage Control
********Affect CPU MHz********
► CPU Voltage Multiplier
This item is used to set CPU Voltage Multiplier.
► CPU Voltage Setting
This item is used to set CPU Voltage.
► CPU Target/Current/Default Voltage
CPU Target/Current/Default Voltage
Target/Current/Default Voltage
These items show the Target/Current/Default CPU Voltage.
NOTE: The CPU Target Voltage equal to “CPU Voltage Multiplier” multiply “CPU Voltage
CPU Target Voltage equal to “CPU Voltage Multiplier” multiply “CPU Voltage
Target Voltage equal to “CPU Voltage Multiplier” multiply “CPU Voltage
Setting” .
► CPU Vdroop Compensation
This item is enable or disable CPU vdroop compensation.
********Affect FSB MHz********
► CPU PLL Setting
This item is used to set DRAM Voltage. The default voltage is 1.890V.
► CPU VTT Voltage Setting
This item is used to set CPU VTT Voltage. The default voltage is 1.200V.
Phoenix - AwardBIOS CMOS Setup Utility
All Voltage Control
******** Affect CPU MH� ********
Item Help
CPU Voltage Multiplier
x 1.000
CPU Voltage Setting
1.2500V
Menu Level ►
CPU Target Voltage
1.2500V
CPU Current Voltage
1.2540V
CPU Default Voltage
1.2500V
CPU Vdroop Compensation
Disabled
******** Affect FSB MH� ********
CPU PLL Voltage Setting
1.508861V
CPU VTT Voltage Setting
1.200V
CPU GTL Ref. 0 Voltage
Default
CPU GTL Ref. 1 Voltage
Default
CPU GTL Ref. 2 Voltage
Default
CPU GTL Ref. 3 Voltage
Default
NB Voltage Setting
1.250V
NB GTL Ref. Voltage
Default
SB Voltage Setting
1.500V
↑↓��������:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
x 1.000
