manualshive.com logo in svg

Foxconn 945G7MD, Руководство пользователя, Страница: 19 / 87

Поделиться
Скачать
Foxconn 945G7MD Скачать руководство пользователя страница 19

12

Chapter 2   Installation Instructions

Memory

This motherboard includes four 184-pin slots with 266/333/400 MHz Dual Chan-
nel DDR DRAM interface, You must install at least one memory module to
ensure normal operation. If you install four modules, they must be the same
speed. Mixing memory modules from different manufactures are not
recommended.

For the latest memory modules support list, please visit the website:

http://www.foxconnchannel.com

Installation of DDR Memory

1. There is only one gap in the center of the DIMM slot, and the memory module

can be fixed in one direction only.

2. Align the memory module to the DIMM slot, and insert the module

vertically into the DIMM slot.

3. The plastic clips at both sides of the DIMM slot will lock automatically.

Note:

Be sure to unplug the AC power supply before adding or re-
moving expansion cards or other system peripherals, espe-
cially the memory devices, otherwise your motherboard or the
system memory might be seriously damaged.

DIMM0

DIMM1

DIMM2

DIMM3

Содержание 945G7MD
























































































Отзывы:

Нет отзывов