Foxconn 865A01 G series Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 124

background image

54

Chapter 3 BIOS Description

865A01 G/PE User Manual

IDE Primary Master/Slave UDMA (Default: Auto)

This option is used to set whether the IDE Primary Master/Slave Unit supports
Ultra DMA. With it set to Auto, BIOS will automatically test whether IDE sup
ports Ultra DMA; with it set to Disabled, the Ultra DMA function will be locked.

On-Chip Secondary PCI IDE (Default: Enabled)

This option is used to set whether the On-chip Secondary PCI IDE is used. The
available setting values are: Disabled and Enabled.

IDE Secondary Master/Slave PIO (Default: Auto)

This option is used to set the PIO transfer mode under the IDE Secondary Master/
Slave Controller. With it set to Auto, BIOS will automatically detect whether IDE
supports the Ultra DMA; with it set to Disabled, the Ultra DMA function will be
locked.

IDE Secondary Master/Slave UDMA (Default: Auto)

This option is used to set whether the second group of primary/secondary
equipment supports Ultra DMA. If the setting is Auto, BIOS will automatically
detect whether the IDE hard disk supports Ultra DMA; if the setting is Disabled,
it will be locked

SATA Mode(Default: IDE)

This option is used to set the SATA mode. When it is set to IDE, the mode will
be IDE only. The available setting values are: IDE and RAID.
Note:If want to use Raid Function, On-Chip Serial ATA must be set Enhance
mode.

On-Chip Serial ATA (Default: Auto)

This option is used to set the On-chip Serial ATA function. When it is set to
Disabled, the function will be locked; when it is set to Auto, the BIOS will lock
the function; with it set to Combined Mode, four HDDs at most will be
supported; with it set to Enhanced Mode, six HDDs at most will be supported
(for those under Windows 2000 and WindowsXP only); with it set to S-ATA Only,
only the S-ATA HDD can be used.

Serial ATA Port 0/1 Mode (Default: Primary Master/Primary Slave)

This option is used to set the Serial ATA Port 0/1 Mode.With the mode set to
Primary Master/Slave, the Primary IDE cannot be used; only the secondary
IDE and SATA ports 0/1 will be available. With the mode set to Secondary
Master/Slave, the secondary IDE will be unavailable; only the primary IDE and
SATA ports 0/1 can be used. With the mode set to Primary/Secondary Master,
and the option SATA Only selected, the SATA HDD acts as both the primary and
secondary drive. With the mode set to SATA 0/1 Master and the option SATA
Enhanced Mode selected, both IDE ports and both SATA ports will be available.

865A01-FOXCONN-V1.3-EN-121603.p65

2004-5-27, 18:02

54

«
...
60
61
62
63
64
...
»

Содержание 865A01 G series





























































































































Отзывы:

Нет отзывов

Похожие инструкции для 865A01 G series

Бренд: A-Trend Страницы: 40

Бренд: Abit Страницы: 120

Бренд: CompuLab Страницы: 31

Бренд: Texas Instruments Страницы: 23

Бренд: Texas Instruments Страницы: 18

DLP LightCrafter Display 3310

Бренд: Texas Instruments Страницы: 16

Бренд: DFI Страницы: 5

Бренд: Gigabyte Страницы: 100

Бренд: Gigabyte Страницы: 18

Бренд: DFI Страницы: 46

Бренд: ASROCK Страницы: 2

Бренд: RIB Страницы: 12

Бренд: Analog Devices Страницы: 7

Бренд: Maxus Страницы: 59

Бренд: BCM Страницы: 59

NCP45491PMNGEVB

Бренд: ON Semiconductor Страницы: 9

OPTIREG PMIC TLF30682QVS01

Бренд: Infineon Страницы: 24

Бренд: DFI Страницы: 73

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды