Chapter 2 BIOS Description
28
6.2 ACPI Suspend Type
This option is used to set the energy saving mode of the ACPI function.
W hen you select
“
S1 (P0S)
”
mode, the power will not shut off and the
supply status will remain as it is, in S1 mode the computer can be resumed
at any time. When you select
“
S3 (STR)
”
mode, the power will be cut off after
a delay period. The status of the computer before it enters STR will be saved
in memory, and the computer can quickly return to previous status when the
STR function wakes.
6.3 Switch Function
You can choose whether or not to permit your system to enter complete
suspend mode. Suspend mode offers greater power savings, with a corre-
spondingly longer awakening period.
6.4 Power Button Override
This option is used to set the power down method. This function is only valid
for systems using an ATX power supply.
When
“
Instant Off
”
is selected, press the power switch to immediately turn off power.
W hen
“
Delay 4 Sec
”
is selected, press and hold the power button for four
seconds to turn off power.
6.5 Power State Resume Control
This option is used to control power resume state.
6.6 MACPME Power Up Control
Use this option to enable MAC activity to wakeup the system from a power
saving mode.
6.7 PCIPME Power Up Control
Use this option to enable PCI activity to wakeup the system from a power
saving mode.
6.8 USB Port Wake Up Control
Use this option to enable USB devices to wakeup the system from a power
saving mode.
6.9 Power Up by Alarm
This option is used to set the timing of the start-up function. In order to use
this function, the start-up password function must be canceled and the PC
power supply must not be turned off.
6.10 Month Alarm
This option is used to set the timing for the start-up month.
6.11 Day of Month Alarm
This option is used to set the timing for the start-up day of the month.
6.12 Time (hh:mm:ss) Alarm
This option is used to set the timing for the start-up time.
文件使用
"pdfFactory"
试用版本创建
Æ
Æ
www.fineprint.com.cn
