Fox MIG-200D, Руководство пользователя

Страница: 4 / 9

3
TECHNICAL PARAMETERS TABLE
Model MIG-200D
Input Voltage 230V
Input Power 6.8KVA
No-load voltage 72V
Current Range MIG: 30-200A
MMA:20-170A
Duty Cycle 60%
Welding Wire MIG: 0.6-1.0
MMA:1.6-4.0
Efficiency 85%
Protection Level 21S
Weight 17kg
Dimension 570x270x355
INSTALLATION INSTRUCTION
The machine is equipped with power voltage compensation system. When power voltage fluctuates
between±10% of rated voltage, it still can work normally.
When use long cable, in order to prevent voltage form going down, bigger section cable is suggested.
If cable is too long, it may affect the performance of the power system. So we suggest you to use
configured length.
1. Make sure heat emission holes of the machine not blocked or covered.
2. Ground the cables with section area no less than 6mm 2 to the housing, the way is
connecting screw in the back of the power source to ground device, or make sure ground
terminal of power socket is firmly connected. Both ways can be used for absolute safety.
3. Correctly connect the arc torch or holder according to the sketch. Make sure the cable, holder and
fastening plug have been connected with the ground. Put the fastening plug into the fastening
socket at the “-”polarity and fasten it clockwise.
4. Put the fastening plug of the cable to fastening socket of “+” polarity at the front panel, fasten it
clockwise, and the earth clamp at the other terminal clamps the work piece.
5. Please pay attention to the connecting polarity,
DC welding machine has two connecting ways: positive connection and negative
connection. Positive connection: holder connects with “-”terminal, while workpiece with the
“+”
terminal. Negative connection: work piece with the“-” terminal, holder with the “+”
terminal. Choose suitable way according to working demands. If unsuitable choice, it will
cause unstable arc, more spatters and conglutination. If such problems occur, please
change the polarity of the fastening plug.
6. According to input voltage grade, connect power cable with power supply box of relevant