Fox F36-523, Руководство пользователя

Страница: 34 / 153

34
EN
EXTENSION LEADS
Only use three conductors extension leads, with a plug with two plugs and a earthing contact and sockets with two
holes and a earth corresponding to the plug of the tool. When using an electric tool at a remarkable distance from
the power supply, use an extension cable with sufficient dimensions to transport the current which the tool needs. If
the extension lead has not the sufficient dimensions a voltage drop can occur, thus causing an overheating and a
voltage loss. You can only use extension leads which are in compliance with CE standards.
Extension lead length: ............................................................................................................................ up to 15 m
Cable dimensions: ................................................................................................................................. 3 x 2.5 mm²
Before using any kind of extension lead, check that it has not bare wires and that the insulation is not cut or worn.
Repair and change immediately it if it is damaged or worn.
WARNING:
EXTENSION LEADS MUST BE ARRANGED AWAY FROM THE WORKING AREA IN ORDER
THAT THEY DO NOT GET IN TOUCH WITH THE WORKPIECES, THE TOOL OR OTHER
PARTS OF THE MACHINE, THUS CREATING POSSIBLE RISKS.
WARNING:
KEEP THE TOOLS AND THE EQUIPMENT AT A SAFE DISTANCE FROM CHILDREN
RECOMMENDED USE
This machine has been manufactured only for longitudinal and cross cutting of wood.
The blade can be angled from 0 to 45° and if the blade is at 0° it can cut up to 85 mm, while at 45° it can cut up to
60 mm.
The machine is stable enough, however, it can be fixed to the ground.
USE LIMITS
DO NOT cut wood wider than 85 mm.
DO NOT cut metal, stone, rubber, plastics, chalk, glass wool, etc.
DO NOT cut stubs or irregular wood pieces.
DO NOT use it to groove or mould.
DO NOT assemble other tools or different saw blades.
DO NOT use it as a portable tool or a not fixed machine.
DO NOT modify the machine, the safety and protection devices or the switches.
DO NOT use the machine without protective cap or without safety devices.
DO NOT use this table saw to make blind grooves.