19
1.
Keep the work surface clean.
If the work area or surface is busy the probability of injuries is
higher.
2.
Do not use
the machine in
dangerous environment conditions. In order to prevent electric shock,
do
not expose the machine
to rain and do not use it in a damp area. Keep the work area illuminated.
Do not use the machine
near gas or inflammable substances.
3.
Connect
the dust collection device. If the machine is provided with a dust collection device, make
sure that this system is connected and correctly used.
4.
Keep
unknown persons and children away from the machine. All unknown persons and children
must keep a safe distance from the work area.
5.
Protect yourself
from electric shock. Avoid any contact with earthing surfaces.
6.
Handle
the power supply cable with care.
Do not pull
the electric cable to disconnect it from the
plug. Keep the electric cable away from heat, oil and sharp edges.
7.
Use
extension cables designed for outdoor use. When using the machine outdoors, use only
extension cables suitable for outdoor use, having specific indications.
8.
Be vigilant
. Check carefully what you are doing, have good sense. Do not use the machine if you
are tired.
9.
Do not use
the machine if you are have taken medicines, alcohol, drugs.
10.
Avoid
accidental starts. Be sure that the switch is on the OFF position before inserting the plug into
the socket.
11.
Wear appropriate clothing
. Do not wear loose-sleeved garments or pieces of jewllery which may
get caught in the moving parts. For outdoor use we recommend non-slip shoes. Use headgear to
cover hair if necessary.
12.
Use always personal protection devices:
wear protective goggles and masks in case dust or
sawdust is produced. Wear ear muffs or plugs in noisy areas. Wear gloves when handling parts with
sharp edges.
13.
Keep your balance
over the machine. Always keep stand firmly.
14.
Ask
for advices to expert and qualified people if you are not familiar with using such a machine.
15.
Remove
the tools you do not use from the workbench. If you do not use the tools, you must arrange
them in a dry area which is locked and away from the reach of children.
16.
Do not force
the machine. You can obtain better and safer results if you use the machine at the rate
for which it has been designed.
17.
Use
the suitable tool.
Do not use
a small tool for an intensive job. Fox example, do not use a
circular saw to cut branches or stumps.
18.
Block
the piece. If possible, use C-clamps or a holder to fix the piece. It is safer than using only your
hands.
19.
Keep
the tools in perfect conditions. Keep the tools sharp and clean to obtain better and safer
results. Follow the instructions to grease and change the accessories. Check regularly the electric
GENERAL SAFETY INSTRUCTIONS
