
3. Please determine the installation position of the suction foot group according to the actual situation of your
vehicle
roof, and then tighten the
M6 countersunk head screws, as shown in Figure ④.
4. After fixing the suction foot group, connect the suction foot group to the p
neumatic hose
on the crossbar. When the position of the suction foot
group is close to the inner side of the crossbar and the hose on the crossbar is too long, it can be shortened. Please save the cut hose. When the
position of the suction foot group is adjusted later, the cut hose can be extended through the direct joint, as shown in Figure ⑤.
Extend the hose
Shorten the hose
⑤
Movable adjustment of
the distance between the
suction foot groups
After selecting the appropriate position
tighten the screw of the suction foot group
④
19
Installation Notes
Содержание ES-L04
Страница 1: ...FOVNO Electric Crossbars Rack Instructions...