FOVNO ES-L04 Скачать руководство пользователя страница 3

· 

Before use, please clean the roof area and the bottom surface of the suction foot to be installed with water and dry with a microfibre cloth. The suction foot can be installed after 

    ensuring that the area is free of dust and water.

· 

When using, please install the roof rack on a flat and smooth part on the roof. The surface where the suction foots are placed must not have cracks. Do not install the roof rack in 

    places where there vinyl stickers or where there are joins between panels, glass or plastic.

· 

While driving, check whether the control box is working normally every 4 hours using the method above, and check whether all the suction foots are functioning.

· 

When using this product, please pay attention to the following items: the highway speed should not exceed 120km/h, and the ordinary road should not exceed the speed limit 

    sign. Be aware of road conditions and drive slowly on uneven or bumpy conditions.

· 

There is a lithium battery in the control box of this product. The temperature will affect its efficiency. It is recommended to use in an environment at a temperature between

    -20°C and +40°C.

· 

During use, if the control box cannot work normally due to force majeure, please do not panic. Each suction foot of this product is equipped with an air check valve. Even if the 

    control box is not working normally, the suction foot can still be firmly adsorbed for at least 1 hour. Please get off the car in a safe place to check and troubleshoot the problem. 
    If the control box still does not work normally, please stop using it immediately and contact our company's customer service for repair as soon as possible.

· 

When the roof rack is not in use, please dust seal plug the air pipe quick interface on the control box and the main suction foot with a rubber plug to prevent foreign objects from

    entering and affecting the normal operation of the roof rack.

13

Содержание ES-L04
















Отзывы: