Fourier Systems Ltd.
16 Hamelacha St., POB 11681, Rosh Ha
‘
ayin 48091,
Tel: +972-3-901-4849, Fax: +972-3-901-4999
www.FourierEdu.com
EXPERIENCE
SCIENCE!
Timing begins each time a body enters the first photogate (input 1) and
ends when leaving the second photogate (input 2). MultiLogPRO then
displays the elapsed time between entering the gates and the body's
average velocity and acceleration
Use the arrow buttons to scroll between the time, speed and
acceleration results
Press
Escape
to return to the timing menu
Press
Escape
a second time to return to the main menu
Select Sensors Manually
You must be in 8 input mode to be able to select the sensors manually (see page 7).
In the Main Menu screen, use the arrow buttons to select the
setup
menu icon
.
Press the
Enter
button
to enter the setup menu:
In–1: Empty
In–2:
Empty
In–3:
Empty
In–4:
Empty
RATE
=
10/s
SAMPLES = 500
DISPLAY = numeric
Use the
Forward
and
Backward
arrows
to select the
sensor in input 1 and then press the
Enter
button
. The arrow
indicator will move to the second input.
Repeat this procedure with all the sensors you plugged in.
